This quarter-round tile profile from Genesis is a rounded profile with a quarter-round visible side that embellishes the tilework and protects the tile edge. This version is intended for a tile thickness of 10 mm and has a length of 2.7 meters. The finish is brushed steel.
Product & function
The profile is made of grade 304 stainless steel. The manufacturer also recommends stainless steel for outdoor applications.
Application & compatibility
The profile is intended for wall and floor tiles. Choose the version according to the thickness of your tile, so that the top of the profile is flush with the tile surface. For this series, we supply corner pieces, but not in this combination of thickness and finish. Saw the corner at a miter or ask us.
Use & points of attention
- Choose the profile according to the thickness of the tile.
- Apply tile adhesive over the area that forms the edge of the tilework.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply extra adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface is flush with the top of the profile: the profile is not higher than the tile, but about 1 mm lower.
- Fill the joint completely.
Exposed edges can cause injury. Wear gloves when handling. Discoloration or water stains can be removed with a common metal polish. In the case of light rust formation, a stronger agent is needed. When refreshing the surface, always work in the direction of the grain and never use steel wool.
Main features
- Grade 304 stainless steel
- Resistant to the main chemical and atmospheric influences
- Smooth, non-porous surface
- Matching corner pieces available
Technical specifications
| Steel grade |
AISI 304 |
| Surface |
Smooth and non-porous |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile follows the thickness of your tile. Measure the tile and choose the version that matches; the profile must not protrude above the tile surface.
Why stainless steel instead of aluminum? Stainless steel is harder and has better resistance to chemical and atmospheric influences. The manufacturer recommends it for harsher environments such as the food industry, dairy companies, and hospitals.
How deep should the profile be in the adhesive? The mounting flange should be fully embedded. After pressing, apply another layer of adhesive over the flange so that no cavities remain.
Do I need corner pieces? Not necessarily, but they save work: with a corner piece you finish a corner without sawing a miter and you are left with a rounded, safe edge.
