Cement tile impregnating agent
Silicone-based impregnating agent, protection against dirt, water and oil. Preserve the natural appearance of cement tiles. Does not leave streaks.
Instructions :
Clean the surface thoroughly beforehand. Allow to dry for at least 24 hours. Apply undiluted in one direction
apply a thin layer with a roller or sponge. After 5 minutes, rub dry with a clean/dry cloth
micro ber cloth. If necessary, repeat treatment after 24 hours. Ready to use after 6 hours.
Important: Excess impregnating agent can be removed using
from 'Genesis cement tile cleaner - intensive'. Depending on the intensity of use
it is recommended to repeat the impregnation every few months.
Consumption :
1L per 10-30m2 depending on the number of layers and the degree of absorption of the surface.
Attention :
Before use, test on an inconspicuous part of the tile surface according to the instructions. Use with a
temperature between +15°C to +25°C. Repeated exposure may cause dry or cracked skin.
H226 Flammable liquid and vapour.
H336 May cause drowsiness or dizziness.
P101 If medical advice is needed, have this container or label at hand.
P102 Keep out of the reach of children.
P280 Wear protective gloves.
P303+P361+P353 IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P370 + P378 In case of fire: Use water to extinguish.
P501 Dispose of contents/container to local waste disposal points.
Contains :
butyl acetate (CAS: 123-86-4).
Expiration date: see packaging
Store dry and frost-free.
