The Elara designer radiator measuring 181.7 x 60 cm is a steel radiator for central heating with bottom-center connections, in anthracite.
Design & finish
The radiator is made of steel and has horizontal tubes with a diameter of 25 mm. The color is anthracite (RAL 7016).
The radiator is supplied with a matching chrome mounting system. The finish is sensitive to scratches. Use protection on the parts where you use tools during installation before tightening the product.
Application & compatibility
The Elara is intended for central heating systems and for heating a small space or towels, not for drying wet laundry.
Never hang the radiator in or above a bath or shower, in a sauna or steam room, near a swimming pool, or next to a toilet or other objects directly connected to water. Heat output may be reduced under a shelf, in a recess, or behind a mantelpiece.
Installation & use
The radiator has bottom-center connections with a center-to-center distance of 50 mm. The connections are 1/2 inch female thread. The inlet is on the side of the valve on the bottom block: if the valve is on the left, the inlet must also be on the left, and vice versa.
Have the radiator connected by a certified installer. Flush the pipes beforehand and never use hemp as a sealant.
Bleed the radiator regularly via the air vent while it is turned off. Clean it with a damp cloth and do not use aggressive cleaning agents.
Key features
- Steel designer radiator in anthracite
- Horizontal tubes of 25 mm
- 40 tubes
- Bottom-center connection, 1/2 inch female thread
- Supplied with mounting system, without radiator valves
Technical specifications
| Feature |
Value |
| Series |
Elara |
| Type |
Designer radiator |
| Color |
Anthracite (RAL 7016) |
| Material |
Steel |
| Height |
181.7 cm |
| Width |
60 cm |
| Diameter of horizontal tubes |
25 mm |
| Number of tubes |
40 |
| Connection position |
Bottom-center |
| Connection center-to-center distance |
50 mm |
| Connection thread |
1/2 inch female thread |
| Mounting orientation |
Vertical |
| Mounting system |
Included |
| Radiator valves |
Not included |
| Item number |
41.3542 |
| EAN |
8718858070183 |
Frequently asked questions
Are radiator valves and a mounting system included? The mounting system is included, but the radiator valves are not.
What water and pressure does the central heating system require for the Elara? Fill the system with water having a pH value of 6.5-8 and check that the operating pressure is between 1 and 2 bar to prevent corrosion and leaks.
Spare parts
The following spare part fits this product.
- Mounting set for Elara designer radiator anthracite (41.3525)