Thermostatic shower mixer tap in chrome for surface mounting, so mounted on the wall, with a center-to-center distance of 15 cm.
Design & finish
The tap has a high-gloss chrome finish. It has a handle to turn on the water and a temperature knob to select the temperature.
The temperature knob locks at 38 degrees. If you want a higher temperature, you press the red button in and turn it further.
Application & compatibility
Before ordering, check that the center-to-center distance of your existing connection is 15 cm.
The tap is secured with S-couplings that are supplied. When replacing an old mixer tap, the new tap can also be mounted on the existing S-couplings, where possible.
Installation & use
First turn off the water supply and flush the pipes before installing the tap; this prevents dirt from entering the internal mechanism. Connect the hot water pipe to the left and the cold water pipe to the right.
Apply PTFE tape to the S-couplings (approximately 5 turns clockwise), place the rosettes over the couplings and screw the tap on. First tighten the nuts by hand simultaneously.
After installation, open the handle and do not connect the shower hose yet, so that dirt from the pipes can flow out. Then close the tap and screw the shower hose on.
To get the correct temperature, the tap must be calibrated. Open the tap and hold a thermometer in the water stream. Set the temperature knob to 38 degrees, loosen the screw and pull the inner ring (with the white dot) loose. Place the inner ring back on the 38-degree setting and set the temperature knob back to 38 degrees at the level of the white dot.
Main features
- Thermostatic mixer tap for surface mounting, mounted on the wall
- Center-to-center distance 15 cm
- Temperature knob locks at 38 degrees
- High-gloss chrome finish
- S-couplings are supplied
Technical specifications
| Feature |
Value |
| Brand |
Xellanz |
| Product type |
Thermostatic shower mixer tap |
| Color |
Chrome |
| Finish |
High-gloss |
| Center-to-center distance |
15 cm |
| Temperature knob |
Locks at 38 degrees |
| Mounting |
S-couplings, supplied |
| Installation |
Surface-mounted, on the wall |
| Item number |
23.3605 |
| EAN |
8712117110795 |
Frequently asked questions
Can I mount this tap on my existing S-couplings? When replacing an old mixer tap, this is possible where feasible. The tap is also supplied with S-couplings.
Do I need to calibrate the tap? To get the correct temperature, you calibrate the tap. You do this with a thermometer and the inner ring with the white dot.
Which water pipe goes on the left and which on the right? Hot water on the left, cold water on the right.
Spare parts
The following spare part fits this product.
- Thermostatic internal mechanism with ring for shower thermostat (23.3603)