This quarter-round tile profile from Genesis is a rounded profile with a quarter-round visible side that embellishes the tilework and protects the tile edge. This version is intended for a tile thickness of 10 mm and has a length of 2.5 meters. The version is polished steel.
Product & function
The profile is made of stainless steel of quality 304. The manufacturer also recommends stainless steel for outdoor applications.
Application & compatibility
The profile is intended for wall and floor tiles. Choose the version according to the thickness of your tile, so that the top of the profile is flush with the tile surface. The matching corner piece is Corner piece for quarter-round tile profile Stainless Steel 10 mm 1 piece ECQ100.84, for external corners. This allows you to finish the corner without mitering.
Use & points of attention
- Choose the profile according to the thickness of the tile.
- Apply tile adhesive over the area that forms the edge of the tilework.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply extra adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface is flush with the top of the profile: the profile is not higher than the tile, but about 1 mm lower.
- Fill the joint completely.
Exposed edges can cause injury. Wear gloves when processing. Discoloration or water stains can be removed with a common metal polishing agent. In case of light rust formation, a stronger agent is needed. Always work in the direction of the grain when touching up the surface and never use steel wool.
Main features
- Stainless steel quality 304
- Resistant to the main chemical and atmospheric influences
- Smooth, non-porous surface
- Matching corner piece available in this size and finish
Technical specifications
| Steel quality |
AISI 304 |
| Surface |
Smooth and non-porous |
Frequently asked questions
What profile thickness do I need? The thickness of the profile follows the thickness of your tile. Measure the tile and choose the version that matches it; the profile must not protrude above the tile surface.
Why stainless steel instead of aluminum? Stainless steel is harder and has better resistance to chemical and atmospheric influences. The manufacturer recommends it for harsher environments such as the food industry, dairy companies, and hospitals.
How deep should the profile be in the adhesive? The mounting flange should be fully embedded. After pressing, apply another layer of adhesive over the flange so that no cavities remain.
Do I need corner pieces? Not necessarily, but they save work: with a corner piece you finish a corner without mitering and you are left with a rounded, safe edge.
