{"title":"Construction materials","description":"\u003cp\u003eBuilding materials for finishing tilework and sanitary installations: grout and grout additive, sealant and waterproofing membrane, products for maintenance and joint renovation, and building materials such as leveling sand. Start with the substrate: it must be dry, level and structurally sound before you begin bonding, sealing or grouting.\u003c\/p\u003e","products":[{"product_id":"litokol-starlike-r-evo-voegspaan-946-gr","title":"Litokol STARLIKE® EVO Jointing trowel 946 GR","description":"\u003cp\u003eThe Litokol Starlike Grout Float Pro is a professional rubber grout float, article number 946GR, made for grouting with the decorative epoxy gels from the Starlike line. The rubber edge has two profiles: 18° and 42°.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Function\u003c\/h3\u003e\u003cp\u003eThe two rubber profiles are for different grouts and joint widths: 18° for one density and width, 42° for the other. This way, one float covers both situations. Green, 245 by 115 millimeters, and heavy enough to feel it in your hand. The ergonomic grip makes a noticeable difference if you grout an entire bathroom floor in one session.\u003c\/p\u003e\u003ch3\u003eApplication \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThe float itself makes no demands on the substrate; these follow from the grout you use.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eGrouting with Starlike Pro\u003c\/li\u003e\n\n\u003cli\u003eGrouting with Starlike Crystal\u003c\/li\u003e\n\n\u003cli\u003eGrouting with Starlike Easy\u003c\/li\u003e\n\n\u003cli\u003eFloor and wall\u003c\/li\u003e\n\n\u003cli\u003eAlso for outdoor applications\u003c\/li\u003e\n\n\u003cli\u003eNarrow and wide joints, thanks to the two profiles\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote the limit:\u003c\/strong\u003e The float is designed for Starlike's decorative epoxy gels. For cement-based grout, you can use a regular grout float.\u003c\/p\u003e\u003ch3\u003eUsage \u0026amp; Points of Attention\u003c\/h3\u003e\u003cp\u003eSpread the epoxy gel diagonally across the surface, perpendicular to the joint direction, and completely fill the joints. Then remove the excess material from the tile surface.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eWork diagonally relative to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eCompletely fill joints until saturated\u003c\/li\u003e\n\n\u003cli\u003eImmediately remove excess material from the tile\u003c\/li\u003e\n\n\u003cli\u003eChoose the profile that matches the joint width\u003c\/li\u003e\n\n\u003cli\u003eClean with water as long as the grout is fresh\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFinish the surface while the grout is still fresh. Once cured, epoxy can only be removed mechanically from the tile.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTwo rubber profiles in one float: 18° and 42°\u003c\/li\u003e\n\n\u003cli\u003eWear-resistant rubber edge\u003c\/li\u003e\n\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\n\u003cli\u003eSuitable for floor and wall, indoor and outdoor\u003c\/li\u003e\n\n\u003cli\u003eDimensions 245 by 115 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight 328 grams\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eProfessional rubber grout float\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eArticle number\u003c\/td\u003e\n\n\u003ctd\u003e946GR\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProfiles\u003c\/td\u003e\n\n\u003ctd\u003e18° and 42°\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\n\u003ctd\u003e245 × 115 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e328 grams\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eColor\u003c\/td\u003e\n\n\u003ctd\u003eGreen\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003eStarlike Pro, Starlike Crystal and Starlike Easy\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this float have two different edges?\u003c\/strong\u003e The 18° and 42° edges are designed for grouts with different densities and for narrow versus wide joints. This way, one float covers both situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I also use it for Starlike EVO?\u003c\/strong\u003e The technical sheet mentions Starlike Pro, Crystal, and Easy. For EVO, the product's sheet specifies a rubber grout float without a specific article number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this float also be used outdoors?\u003c\/strong\u003e Yes. The sheet explicitly mentions outdoor applications, in addition to indoor floor and wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the float?\u003c\/strong\u003e With water, as long as the grout is still fresh. Cured epoxy can only be removed mechanically, so clean immediately after use.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070086178,"sku":"8032853933411","price":13.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-voegspaan-946-gr-gereedschappen-681.webp?v=1678039003"},{"product_id":"voegkleuren-litokol-starlike-r-evo-bronze-200-gram-voor-5-kg","title":"Color effect Bronze Litokol STARLIKE® Finishes 200 grams for 5 kg","description":"\u003cp\u003eLitokol Starlike Finishes Bronze is a color effect that you mix into Starlike EVO as a third component. The 200-gram sachet is pre-dosed for a 5 kg bucket, so you don't have to weigh it. It is therefore not a standalone grout but an additive to a bucket that you purchase separately.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBronze is warm and dark metal, with more red than gold. It suits earthy tiles and terracotta.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the metallic range only works in combination with \u003cstrong\u003eStarlike EVO 113 Neutro\u003c\/strong\u003e. If you mix Bronze with a colored bucket, you will not get the effect you paid for. So, order the Neutro bucket as well.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and mosaic\u003c\/li\u003e\n\n\u003cli\u003eClinker\u003c\/li\u003e\n\n\u003cli\u003eWall and floor, indoors only\u003c\/li\u003e\n\n\u003cli\u003eBathrooms, kitchens, shops, and showrooms\u003c\/li\u003e\n\n\u003cli\u003eFurniture elements and columns\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMind the limits.\u003c\/strong\u003e Do not use a bucket with this effect outdoors — on terraces, balconies, facades, and in swimming pools — because the additives are not resistant to UV radiation. Also, do not use it on surfaces that come into contact with aggressive chemicals, such as industrial floors.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eThe requirements for the substrate are those of Starlike EVO itself: the joints must be clean, dust-free, open for the full tile thickness, and the tile adhesive must be completely dry and cured.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eOnly with Starlike EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003ePre-dosed for the bucket size: this sachet is for 5 kg\u003c\/li\u003e\n\n\u003cli\u003eNot for outdoor applications\u003c\/li\u003e\n\n\u003cli\u003eNot for surfaces with aggressive chemical exposure\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe effect is most pronounced on a surface where daylight or artificial light falls. You will see little of it in a dark corner.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, mix the hardener (part B) with the colored paste (part A) of Starlike EVO, using a slow-speed mixer, until a lump-free mass is formed. Then, carefully add this sachet and gently mix it until it is evenly distributed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePour carefully: the powder is light and easily creates dust\u003c\/li\u003e\n\n\u003cli\u003eMix at low speed, otherwise the product will splatter\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eMost favorable between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eDo not add water or solvent to make it easier to spread. Below +10 °C, the mixture becomes thick and difficult to work with, and curing takes much longer; do not start if the temperature drops below +10 °C within 24 hours. In warm weather, quickly spread the product over the surface, as the reaction heat in the bucket shortens the working time.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePre-dosed for a 5 kg bucket: no weighing required\u003c\/li\u003e\n\n\u003cli\u003eDoes not alter the ease of cleaning Starlike EVO\u003c\/li\u003e\n\n\u003cli\u003ePart of the Metallic Collection, for use with EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003eThe effect becomes stronger the more light falls on the surface\u003c\/li\u003e\n\n\u003cli\u003eFor indoor applications only\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eColor effect as third component for Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e200 grams, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003eStarlike EVO 5 kg bucket\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTo be mixed with\u003c\/td\u003e\n\n\u003ctd\u003eOnly Starlike EVO 113 Neutro\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication\u003c\/td\u003e\n\n\u003ctd\u003eIndoors only, floor and wall\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003eMost favorable between +18 °C and +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I also need a bucket of Starlike EVO for this?\u003c\/strong\u003e Yes. This is an additive, not a grout in itself. The sachet is pre-dosed for a 5 kg bucket, which you order separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mix this with a colored bucket?\u003c\/strong\u003e No. The metallic range is designed for Starlike EVO 113 Neutro. With a colored bucket, you will not achieve the metallic effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on my balcony or terrace?\u003c\/strong\u003e No. These additives are not resistant to UV radiation and are therefore intended for indoor use only. For outdoor use, choose a regular EVO color without effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prevent the powder from creating dust?\u003c\/strong\u003e Pour it slowly into the already mixed bucket and keep the mixer speed low. The powder is very light, so fast pouring or hard mixing will cause it to swirl up.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070118946,"sku":"8032853934579","price":35.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/kleureffect-bronze-litokol-starliker-evo-200-gram-voor-5-kg-voegadditief-539.webp?v=1678039008"},{"product_id":"voegkleuren-litokol-starlike-r-evo-rusty-200-gram-voor-5-kg","title":"Color effect Rust Litokol STARLIKE® Finishes 200 grams for 5 kg","description":"\u003cp\u003eLitokol Starlike Finishes Rust is a color effect that you mix into Starlike EVO as a third component. The 200-gram bag is pre-dosed for a 5 kg bucket, so you do not need to weigh it out. It is therefore not a standalone grout but an additive for a bucket that you buy separately.\u003c\/p\u003e\n\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\n\u003cp\u003eRust is a matte reddish-brown with a weathered appearance, as if the metal has been there for years. It works well with concrete-look and industrial interiors.\u003c\/p\u003e\n\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the metallic range works exclusively in combination with \u003cstrong\u003eStarlike EVO 113 Neutro\u003c\/strong\u003e. If you mix Rust into a colored bucket, you will not get the effect you are paying for. Therefore, order the Neutro bucket separately.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and mosaics\u003c\/li\u003e\n\n\u003cli\u003eClinker\u003c\/li\u003e\n\n\u003cli\u003eWalls and floors, indoors only\u003c\/li\u003e\n\n\u003cli\u003eBathrooms, kitchens, shops and showrooms\u003c\/li\u003e\n\n\u003cli\u003eFurniture elements and columns\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eObserve the limitations.\u003c\/strong\u003e Do not use this effect outdoors — on patios, balconies, facades and in swimming pools — because the additives are poorly resistant to UV radiation. Do not use it on surfaces that come into contact with aggressive chemicals, such as industrial floors.\u003c\/p\u003e\n\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\n\u003cp\u003eThe requirements for the substrate are the same as those for Starlike EVO itself: the joints must be clean, dust-free and open across the full tile thickness, and the tile adhesive must be completely dry and fully cured.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eExclusively with Starlike EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003ePre-dosed for the bucket size: this bag is for 5 kg\u003c\/li\u003e\n\n\u003cli\u003eNot for outdoor applications\u003c\/li\u003e\n\n\u003cli\u003eNot for surfaces with aggressive chemical exposure\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe effect is most pronounced on a surface exposed to daylight or artificial light. In a dark corner, you will see very little of it.\u003c\/p\u003e\n\u003ch3\u003eProcessing\u003c\/h3\u003e\n\u003cp\u003eFirst mix the hardener (part B) into the colored paste (part A) of Starlike EVO using a low-speed mixer until you have a lump-free mass. Then carefully pour this bag in and mix it in gently until it is evenly distributed.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ePour in carefully: the powder is light and dusts easily\u003c\/li\u003e\n\n\u003cli\u003eMix at low speed, otherwise the product will splash\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eBest between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is still fresh\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDo not add water or solvent to make it easier to spread. Below +10 °C, the mixture becomes thick and difficult to work with, and curing takes much longer; do not start if the temperature inside drops below +10 °C within 24 hours. In warm weather, distribute the product quickly over the surface, because the heat of reaction in the bucket shortens the working time.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePre-dosed for a 5 kg bucket: no weighing\u003c\/li\u003e\n\n\u003cli\u003eDoes not affect the ease with which Starlike EVO can be cleaned\u003c\/li\u003e\n\n\u003cli\u003ePart of the Metallic Collection, for use with EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003eThe effect becomes stronger as more light falls on the surface\u003c\/li\u003e\n\n\u003cli\u003eExclusively for indoor applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eColor effect as a third component for Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContents\u003c\/td\u003e\n\n\u003ctd\u003e200 grams, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003e5 kg bucket of Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTo mix with\u003c\/td\u003e\n\n\u003ctd\u003eExclusively Starlike EVO 113 Neutro\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication\u003c\/td\u003e\n\n\u003ctd\u003eIndoors only, floors and walls\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003eBest between +18 °C and +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I also need a bucket of Starlike EVO with this?\u003c\/strong\u003e Yes. This is an additive, not a grout on its own. The bag is pre-dosed for a 5 kg bucket, which you order separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix this into a colored bucket?\u003c\/strong\u003e No. The metallic range is made for Starlike EVO 113 Neutro. With a colored bucket, you will not get the metallic effect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I also use this on my balcony or patio?\u003c\/strong\u003e No. These additives are poorly resistant to UV radiation and are therefore intended for indoor use only. Use a regular EVO color without effect outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I prevent the powder from dusting?\u003c\/strong\u003e Pour it slowly into the already mixed bucket and keep the mixer speed low. The powder is very light, so pouring it in quickly or mixing hard will cause it to swirl up.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070151714,"sku":"8032853938232","price":35.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/kleureffect-roest-litokol-starliker-evo-200-gram-voor-5-kg-voegadditief-121.webp?v=1678039016"},{"product_id":"litokol-starlike-r-evo-580-rosso-mattone-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 580 Rosso mattone 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in colour Rosso mattone (580). The coloured paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eRosso mattone (580) is brick red, earthy and muted. With clinker and terracotta, it blends seamlessly with the tile itself.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The colour comes from sintered quartz beads that are coloured on the surface, meaning no pigment remains on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This helps determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as a grout, Starlike EVO is applied in joints that are clean, dust-free and open for the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and levelling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not permitted, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is formed, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApply between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColour stable: the quartz beads are coloured on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified as an irritant only, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colours. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070184482,"sku":"8052283880871","price":56.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-580-rosso-mattone-2-5-kg-voegmiddel-774.webp?v=1678039028"},{"product_id":"voegkleuren-litokol-starlike-r-evo-platinum-200-gram-voor-5-kg","title":"Color effect Platinum Litokol STARLIKE® Finishes 200 grams for 5 kg","description":"\u003cp\u003eLitokol Starlike Finishes Platinum is a color effect that you mix into Starlike EVO as a third component. The 200-gram sachet is pre-dosed for a 5 kg bucket, so you don't have to weigh it. It is not a standalone grout but an additive to a bucket that you buy separately.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003ePlatinum gives the grout a cool, silver-gray metallic sheen. With white and gray tile work, this creates a sleek, almost industrial look.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the metallic range only works in combination with \u003cstrong\u003eStarlike EVO 113 Neutro\u003c\/strong\u003e. If you mix Platinum into a colored bucket, you will not achieve the effect you are paying for. So, order the Neutro bucket with it.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and mosaic\u003c\/li\u003e\n\n\u003cli\u003eClinker bricks\u003c\/li\u003e\n\n\u003cli\u003eWall and floor, indoors only\u003c\/li\u003e\n\n\u003cli\u003eBathrooms, kitchens, shops, and showrooms\u003c\/li\u003e\n\n\u003cli\u003eFurniture elements and columns\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePay attention to the limits.\u003c\/strong\u003e Do not use a bucket with this effect outdoors — on terraces, balconies, facades, and in swimming pools — because the additives have poor resistance to UV radiation. Also, do not use it on surfaces that come into contact with aggressive chemicals, such as industrial floors.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eThe substrate requirements are those of Starlike EVO itself: the joints must be clean, dust-free, and open across the full tile thickness, and the tile adhesive must be completely dry and cured.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eOnly with Starlike EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003ePre-dosed for the bucket size: this sachet is for 5 kg\u003c\/li\u003e\n\n\u003cli\u003eNot for outdoor applications\u003c\/li\u003e\n\n\u003cli\u003eNot for surfaces with aggressive chemical exposure\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe effect is most pronounced on a surface where daylight or artificial light falls. In a dark corner, you will see little of it.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, mix the hardener (part B) into the colored paste (part A) of Starlike EVO, using a slow-speed mixer, until a lump-free mass is formed. Then carefully pour in this sachet and gently mix it until it is evenly distributed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePour carefully: the powder is light and easily disperses\u003c\/li\u003e\n\n\u003cli\u003eMix at low speed, otherwise the product will splatter\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eMost favorable between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eDo not add water or solvent to make it easier to spread. Below +10 °C, the mixture becomes thick and difficult to work with, and curing takes much longer; do not start if the temperature drops below +10 °C within 24 hours. In warm weather, spread the product quickly over the surface, as the reaction heat in the bucket shortens the working time.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePre-dosed for a 5 kg bucket: no weighing\u003c\/li\u003e\n\n\u003cli\u003eDoes not alter the ease with which Starlike EVO can be cleaned\u003c\/li\u003e\n\n\u003cli\u003ePart of the Metallic Collection, for use with EVO 113 Neutro\u003c\/li\u003e\n\n\u003cli\u003eThe effect becomes stronger as more light falls on the surface\u003c\/li\u003e\n\n\u003cli\u003eFor indoor applications only\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eColor effect as third component for Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e200 grams, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003e5 kg bucket of Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTo be mixed with\u003c\/td\u003e\n\n\u003ctd\u003eOnly Starlike EVO 113 Neutro\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication\u003c\/td\u003e\n\n\u003ctd\u003eIndoors only, floor and wall\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003eMost favorable between +18 °C and +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I also need a bucket of Starlike EVO for this?\u003c\/strong\u003e Yes. This is an additive, not a grout in itself. The sachet is pre-dosed for a 5 kg bucket, which you order separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mix this into a colored bucket?\u003c\/strong\u003e No. The metallic range is designed for Starlike EVO 113 Neutro. With a colored bucket, you will not achieve the metallic effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this also be used on my balcony or terrace?\u003c\/strong\u003e No. These additives have poor resistance to UV radiation and are therefore only intended for indoor use. For outdoor use, use a regular EVO color without effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prevent the powder from dusting?\u003c\/strong\u003e Pour it slowly into the already mixed bucket and keep the mixer speed low. The powder is very light, so fast pouring or hard mixing will cause it to swirl up.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070217250,"sku":"8032853938225","price":45.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/kleureffect-platinum-litokol-starliker-evo-200-gram-voor-5-kg-voegadditief-315.webp?v=1678039039"},{"product_id":"litokol-starlike-r-evo-colorcrystal-800-grigio-oslo-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO ColorCrystal 800 Grigio oslo 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Grigio Oslo (800) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eGrigio Oslo (800) is a translucent gray with shimmer. On glass mosaic, it creates a cool, slightly reflective wall.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eThis translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and heavily trafficked floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling compounds\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is formed, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes of pot life in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout — wait 48 to 72 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePot life\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as a tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout may yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070315554,"sku":"8032853939222","price":67.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/Litokol_STARLIKE_EVO_ColorCrystal_800_Grigio_oslo_2_5_kg.png?v=1724763151"},{"product_id":"litokol-starlike-r-evo-colorcrystal-810-verde-capri-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO ColorCrystal 810 Verde capri 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in the color Verde Capri (810). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaics, and the same product can also be used as a tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eVerde Capri (810) is translucent green with a shimmering core. It works best where light falls on the wall and the color can come alive.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eThis translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This way you can determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not included in the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the wall and bottom of the bucket clean. Manual mixing is discouraged.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorable between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove hazes and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritating, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove hazes within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070348322,"sku":"8032853939239","price":67.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/Litokol_STARLIKE_EVO_ColorCrystal_810_Verde_capri_2_5_kg.png?v=1724763204"},{"product_id":"litokol-starlike-r-evo-colorcrystal-825-beige-havana-2-5k","title":"Epoxy grout Litokol STARLIKE® EVO ColorCrystal 825 Beige havana 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Beige Havana (825). The colored paste and the hardener are together in one bucket. You can grout ceramics, porcelain stoneware and mosaic with it, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBeige Havana (825) is translucent warm beige with a subtle sheen. It keeps glass mosaic soft instead of cool.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eThis translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer advises always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not included in the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free and open for the full tile thickness. First check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and completely empty it into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the wall and bottom of the bucket afterwards. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove veils and residues after approximately 24 hours from the tile with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrouts and adheres with the same product\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified as irritating only, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to approximately 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove veils within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the joint can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070381090,"sku":"8032853939253","price":67.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/Litokol_STARLIKE_EVO_ColorCrystal_825_Beige_havana_2_5_kg.png?v=1724763065"},{"product_id":"litokol-starlike-r-evo-colorcrystal-830-rosa-kyoto-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO ColorCrystal 830 rosa kyoto 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Rosa kyoto (830). The colored paste and the hardener are together in one bucket. You can grout ceramics, porcelain stoneware and mosaic with it, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eRosa kyoto (830) is translucent pink with shimmer, light and restrained. On a small mosaic surface, it gives a soft, warm reflection.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eThis translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spa and hammam\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer prescribes always making a test grout first. This way, you determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous articles such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free and open over the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass is formed and scrape the sides and bottom of the bucket afterwards. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive with the same product\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so distribute the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove hazes within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917070413858,"sku":"8032853939260","price":67.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/Litokol_STARLIKE_EVO_ColorCrystal_830_rosa_kyoto_2_5_kg.png?v=1724763412"},{"product_id":"litokol-starlike-r-evo-300-azzurro-pastello-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 300 Azzurro pastello 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Azzurro pastello (300). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eAzzurro pastello (300) is soft pastel blue, light enough never to be harsh. With white mosaic, it gives a bathroom an airy, almost summery tone.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floor and wall, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, meaning no pigment is left on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstructed stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer prescribes always making a test joint first. This way you determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous articles such as concrete curbs are outside the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free and open over the full tile thickness. First check whether the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen tops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag with hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 revolutions until a creamy, lump-free mass and scrape the wall and bottom of the bucket afterwards. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorable between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes processing time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the grouting direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything when the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before laying breathable material over it.\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified as merely irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it with the smooth side of the float to approximately 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this is faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residue too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout may yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071233058,"sku":"8052283880611","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-300-azzurro-pastello-2-5-kg-voegmiddel-854.webp?v=1678039368"},{"product_id":"litokol-starlike-r-evo-310-azzurro-polvere-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 310 Azzurro polvere 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Azzurro polvere (310). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eAzzurro polvere (310) is powder blue with gray undertones. It is the understated version: color, but without the wall demanding attention.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, meaning no pigment is left on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and heavily trafficked floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer always advises making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as grout, apply Starlike EVO to joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket containing part A; roll up the bag as you do so to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is achieved, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, thus preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritant, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this time is shorter, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout may yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071298594,"sku":"8052283880635","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-310-azzurro-polvere-2-5-kg-voegmiddel-563.webp?v=1678039393"},{"product_id":"litokol-starlike-r-evo-320-azzurro-caraibi-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 320 Azzurro caraibi 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Azzurro caraibi (320). The colored paste and the hardener are together in one bucket. You can grout ceramics, porcelain stoneware and mosaics with it, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eAzzurro caraibi (320) is bright turquoise. This is the color people choose for a swimming pool or a mosaic wall that really stands out.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, meaning no pigment is left behind on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer always recommends making a test joint first. This helps determine if the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, strong, crack-free, and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag with hardener and empty it completely into the bucket with part A; roll up the bag so that nothing remains. Mix with a slow-speed mixer of approximately 300 rpm until a creamy, lump-free mass is formed, and scrape the sides and bottom of the bucket afterwards. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after about 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrouts and adheres with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071364130,"sku":"8052283880659","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-320-azzurro-caraibi-2-5-kg-voegmiddel-208.webp?v=1678039415"},{"product_id":"litokol-starlike-r-evo-330-blu-avio-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 330 Blu avio 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Blu Avio (330) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as a tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eBlu Avio (330) is a muted gray-blue, the color of a cloudy sky. It adds depth to blue mosaic without making it brighter than it already is.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured grout is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, preventing pigment from remaining on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are excluded from the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with component A; roll up the bag as you do so to ensure nothing is left behind. Mix with a slow-speed mixer at approximately 300 rpm until a creamy, lump-free mass is obtained, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, optimally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean as long as the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully load-bearing after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, thus preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad-bearing\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as a tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to approximately 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071429666,"sku":"8052283880673","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-330-blu-avio-2-5-kg-voegmiddel-867.webp?v=1678039437"},{"product_id":"litokol-starlike-r-evo-340-blu-denim-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 340 Blu denim 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Blu denim (340). The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware and mosaic tiles, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBlu denim (340) has the tone of washed denim: blue with a worn look. With white and light grey tiling, this creates a relaxed, informal image.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, which means no pigment is left behind on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spa and hammam\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and heavy traffic floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This helps determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free and open over the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass is formed and scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritant, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. This goes faster in warm weather, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071495202,"sku":"8052283880697","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-340-blu-denim-2-5-kg-voegmiddel-404.webp?v=1678039461"},{"product_id":"litokol-starlike-r-evo-350-blu-zaffiro-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 350 Blu zaffiro 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Blu zaffiro (350). The colored paste and hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBlu zaffiro (350) is a deep, saturated blue. Against white mosaic, it creates a distinct grid; in a swimming pool, it gives the water a darker core.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz beads that are colored on the surface, meaning no pigment remains on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer advises always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, strong, crack-free, and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not permitted, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with component A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass is formed, and scrape the sides and bottom of the bucket. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, optimally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout—wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eDoes not contain cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified as irritant only, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this time is shorter, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071560738,"sku":"8052283880710","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-350-blu-zaffiro-2-5-kg-voegmiddel-203.webp?v=1678039483"},{"product_id":"litokol-starlike-r-evo-430-verde-pino-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 430 Verde pino 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Verde pino (430) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eVerde pino (430) is dark pine green, almost black in the shade. With white tiling, it gives a classic, somewhat stately impression.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz beads that are colored on the surface, preventing pigment from remaining on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and heavy traffic floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, Starlike EVO is applied in joints that are clean, dust-free and open for the full tile thickness. First check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D range.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with part A; roll up the bag so that nothing remains. Mix with a slow-speed mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, optimally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eHaze and residues can be removed from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz beads are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as an irritant, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071659042,"sku":"8052283880796","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-430-verde-pino-2-5-kg-voegmiddel-659.webp?v=1678039518"},{"product_id":"litokol-starlike-r-evo-500-rosa-cipria-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 500 Rosa cipria 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in the color Rosa Cipria (500). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Ambiance\u003c\/h3\u003e\u003cp\u003eRosa Cipria (500) is powder pink with beige, not sweet. With white and cream mosaic, it provides a gentle warmth that you feel rather than see.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz microspheres that are colored on the surface, ensuring no pigment is left on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, structurally sound, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and completely empty it into the bucket containing part A; roll up the bag so that nothing is left behind. Mix with a slow-speed mixer of approximately 300 rpm until a creamy, lump-free mass is obtained, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApply between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eFoot traffic after 24 hours, fully load-bearing after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, thus preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz microspheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad-bearing\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e-20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove hazes within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071691810,"sku":"8052283880819","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-500-rosa-cipria-2-5-kg-voegmiddel-757.webp?v=1678039530"},{"product_id":"litokol-starlike-r-evo-530-viola-ametista-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 530 Viola ametista 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in the color Viola ametista (530). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eViola ametista (530) is a muted purple with a gray core. It is the most idiosyncratic color in the line and is best displayed on a small surface.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz beads that are colored on the surface, ensuring that no pigment is left on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer prescribes always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are excluded from the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not permitted, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing remains. Mix with a slow-speed mixer of approximately 300 rpm until a creamy, lump-free mass, and scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eHaze and residues should be removed from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply if the temperature drops below +10 °C within 24 hours, protect the work for the first 12 hours from direct sunlight and strong drafts, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz beads are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in sealed packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. This will be faster in warm weather, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071724578,"sku":"8052283880833","price":49.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-530-viola-ametista-2-5-kg-voegmiddel-698.webp?v=1678039541"},{"product_id":"litokol-starlike-r-evo-600-giallo-vaniglia-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 600 Giallo vaniglia 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Giallo Vaniglia (600). The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware, and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eGiallo Vaniglia (600) is a soft vanilla yellow, more cream than lemon. It gives white tile work a warm, old-fashioned friendly tone.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, preventing pigment from remaining on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This way you can determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as a grout, apply Starlike EVO to joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass, and scrape the sides and bottom of the bucket afterwards. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber trowel, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritant, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as a tile adhesive?\u003c\/strong\u003e Yes. You spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this is faster, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071790114,"sku":"8052283880895","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-600-giallo-vaniglia-2-5-kg-voegmiddel-848.webp?v=1678039563"},{"product_id":"litokol-aquamaster-10kg","title":"Litokol Aquamaster EVO 10 kg waterproof membrane","description":"\u003cp\u003eLitokol Aquamaster EVO is a ready-to-use, reinforced water-based liquid membrane for waterproofing wet areas indoors and outdoors. No reinforcement fabric or sealing tape is required, not even in corners and along edges. This version is the 10 kg bucket.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eAquamaster EVO falls into class DM 02 P according to UNI EN 14891 and is chlorine resistant, making it suitable for swimming pools.\u003c\/p\u003e\u003cp\u003eLight grey, as thick as yoghurt, and you roll it out like paint. It disappears under the tiles, and that's exactly what you want – the work no one ever sees but that holds everything together.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eBathrooms, showers and other wet rooms indoors\u003c\/li\u003e\n\n\u003cli\u003eSwimming pools and water basins\u003c\/li\u003e\n\n\u003cli\u003eTerraces and balconies\u003c\/li\u003e\n\n\u003cli\u003eFloor and wall, indoors and outdoors\u003c\/li\u003e\n\n\u003cli\u003eOn non-absorbent surfaces, including existing tiling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote the limit:\u003c\/strong\u003e Never leave the membrane uncovered: there should always be a ceramic or natural stone finish over it.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThe substrate must be load-bearing, clean, and free of loose parts.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCement screeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and cement-bound plasterwork\u003c\/li\u003e\n\n\u003cli\u003eExisting ceramic tiles and porcelain stoneware\u003c\/li\u003e\n\n\u003cli\u003eLightweight building boards with cement-bound finish layer\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eIf you are unsure whether a specific substrate is suitable, first create a test piece. The number of types of substrates and tiles is too large to rule out everything in advance.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe product is ready-to-use and does not need to be mixed. Apply it with a roller, brush, or smooth steel trowel.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApply between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eFirst layer diluted with 10% water: wait 30 minutes\u003c\/li\u003e\n\n\u003cli\u003eBetween undiluted layers: wait 4 hours\u003c\/li\u003e\n\n\u003cli\u003eLay tiles after 24 hours\u003c\/li\u003e\n\n\u003cli\u003eTotal dry layer thickness 0.8 to 1 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eClean tools with water as long as the product is fresh; once cured, it can only be done mechanically.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eReady-to-use: no mixing, no reinforcement fabric, no corner tapes\u003c\/li\u003e\n\n\u003cli\u003eClass DM 02 P according to UNI EN 14891\u003c\/li\u003e\n\n\u003cli\u003eChlorine resistant, suitable for swimming pools\u003c\/li\u003e\n\n\u003cli\u003eAlso applicable on non-absorbent substrates such as existing tiling\u003c\/li\u003e\n\n\u003cli\u003eSolvent-free, water-based\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eReady-to-use reinforced water-based liquid membrane\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eDM 02 P according to UNI EN 14891\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eColour\u003c\/td\u003e\n\n\u003ctd\u003eLight grey\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e10 kg bucket\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH\u003c\/td\u003e\n\n\u003ctd\u003e8 to 9\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\n\u003ctd\u003e1.50 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSolid content\u003c\/td\u003e\n\n\u003ctd\u003e73 to 76%\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTotal dry layer thickness\u003c\/td\u003e\n\n\u003ctd\u003e0.8 to 1 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApply with\u003c\/td\u003e\n\n\u003ctd\u003eRoller, brush, or smooth steel trowel\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time between undiluted layers\u003c\/td\u003e\n\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLay tiles after\u003c\/td\u003e\n\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened bucket, dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need reinforcement fabric or corner tapes?\u003c\/strong\u003e No. Unlike many other waterproofing membranes, fabric and sealing tapes for corners and edges are not necessary.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply this over my existing tiles?\u003c\/strong\u003e Yes. The product can be applied to non-absorbent substrates, including existing ceramic and porcelain tiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for a swimming pool?\u003c\/strong\u003e Yes. The membrane is chlorine resistant and falls into class DM 02 P according to UNI EN 14891.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can I start tiling?\u003c\/strong\u003e After 24 hours. There is a four-hour waiting time between undiluted layers; the first layer is diluted with 10% water and needs thirty minutes.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071855650,"sku":"8052283882431","price":107.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/litokol-aquamaster-10-kg-onderhoudsproducten-731.webp?v=1683034468"},{"product_id":"litokol-sweepex-spons-geel-voor-epoxyvoegen-11-5x16x7cm-128g0001","title":"Litokol Sweepex Sponge Yellow for epoxy grout 11.5 x 18 x 5 cm (128G0001)","description":"\u003cp\u003eThe Litokol Sweepex sponge is intended for cleaning and maintaining surfaces grouted with epoxy gels from the Starlike range. It comes as a loose sponge.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; function\u003c\/h3\u003e\u003cp\u003eEpoxy requires a different sponge than cement. When washing off an epoxy joint, the sponge must release enough water to loosen the resin, but not empty the joint itself. This sponge is recommended by Litokol for use with Starlike gels, and the datasheets for those gels also refer to it.\u003c\/p\u003e\u003ch3\u003eApplication \u0026amp; compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCleaning of freshly grouted work with Starlike epoxy gels\u003c\/li\u003e\n\n\u003cli\u003eMaintenance of epoxy-grouted surfaces\u003c\/li\u003e\n\n\u003cli\u003eFloor and wall\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e a different sponge is required for cement-based grouts. Litokol recommends a cellulose sponge for those, not this one.\u003c\/p\u003e\u003ch3\u003eUse \u0026amp; considerations\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eUse while the grout is still fresh\u003c\/li\u003e\n\n\u003cli\u003eWring out thoroughly: too wet will empty the joint\u003c\/li\u003e\n\n\u003cli\u003eChange rinse water frequently\u003c\/li\u003e\n\n\u003cli\u003eWork diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eFollow the times specified on the grout datasheet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eIf you are working with a product whose processing times you do not know, adhere to the technical sheet for that product.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor the epoxy gels from the Starlike range\u003c\/li\u003e\n\n\u003cli\u003eDimensions 11.5 × 18 × 5 cm\u003c\/li\u003e\n\n\u003cli\u003eFor cleaning and maintenance\u003c\/li\u003e\n\n\u003cli\u003eFloor and wall\u003c\/li\u003e\n\n\u003cli\u003eCan be ordered separately as a consumable item\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eSponge for epoxy joints\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\n\u003ctd\u003e11.5 × 18 × 5 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003eStarlike epoxy gels\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContents\u003c\/td\u003e\n\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is this sponge for?\u003c\/strong\u003e For cleaning and maintaining surfaces grouted with epoxy gels from the Starlike range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I also use it for cement grout?\u003c\/strong\u003e Litokol recommends a cellulose sponge for that, not this one. For cement-based grout, use that one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wet should the sponge be?\u003c\/strong\u003e Well-wrung out. A too-wet sponge will empty the fresh joint, which you will see later in the seam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need to change the water so often?\u003c\/strong\u003e Because dirty rinse water leaves the dissolved resin back on the tile. That is exactly the haze you are trying to remove.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071888418,"sku":"8032853933503","price":1.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-spons-geel-voor-epoxyvoegen-128g-gereedschappen-483.webp?v=1678039588"},{"product_id":"litokol-starlike-r-evo-145-nero-carbonio-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 145 Nero carbonio 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Nero carbonio (145) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eNero carbonio (145) goes a step deeper than graphite: dense, matte black. On a white mosaic wall, this provides the sharpest contrast the line has to offer.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, ensuring no pigment remains on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the application scope.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling compounds\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-speed mixer of approximately 300 rpm until a creamy, lump-free mass is obtained, then scrape the sides and bottom of the bucket. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, optimally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to approximately 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071921186,"sku":"8052283880284","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-145-nero-carbonio-2-5-kg-voegmiddel-779.webp?v=1678039593"},{"product_id":"litokol-starlike-r-evo-205-travertino-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 205 Travertino 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Travertino color (205). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eTravertino (205) follows the tone of travertine, with that sandy beige that is slightly grayer than pure sand. With travertine look, the grout almost disappears.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres colored on the surface, which means no pigment remains on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and heavy traffic floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This way you can determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free and open for the full tile thickness. First check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and completely empty it into the bucket with part A; roll up the bag so that nothing remains. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the sides and bottom of the bucket clean. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritant, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to approximately 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. This goes faster in warm weather, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After hardening, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout can yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917071953954,"sku":"8052283880376","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-205-travertino-2-5-kg-voegmiddel-255.webp?v=1678039609"},{"product_id":"litokol-starlike-r-evo-400-verde-salvia-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 400 Verde salvia 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Verde salvia (400). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eVerde salvia (400) is grey-green like sage leaves, soft and dusty. It pairs well with natural stone and tiles with an earthy undertone.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres colored on the surface, which prevents pigment from remaining on the tile and makes cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D range.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket containing part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is formed, scraping the sides and bottom of the bucket. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive in one product, for joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: quartz spheres are surface-colored\u003c\/li\u003e\n\n\u003cli\u003eHardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as a tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this time is shorter, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove hazes within approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072019490,"sku":"8052283880734","price":56.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-400-verde-salvia-2-5-kg-voegmiddel-421.webp?v=1678039634"},{"product_id":"litokol-starlike-r-evo-420-verde-prato-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 420 Verde prato 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Verde prato (420) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eVerde prato (420) is a fresh grass green. It is the most cheerful green in the line and calls for a wall that can handle that cheerfulness.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, so no pigment remains on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and heavy traffic floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer prescribes always making a test joint first. This way you determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO in joints that are clean, dust-free and open over the full tile thickness. First check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not permitted, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-running mixer of approximately 300 rpm until a creamy, lump-free mass, and scrape the wall and bottom of the bucket afterwards. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean as long as the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything when the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified exclusively as irritating, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residue too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout may yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072085026,"sku":"8052283880772","price":53.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-420-verde-prato-2-5-kg-voegmiddel-779.webp?v=1678039658"},{"product_id":"litokol-starlike-r-evo-110-grigio-perla-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 110 Grigio perla 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Grigio perla (110) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eGrigio perla (110) is a light pearl gray with a warm undertone. On concrete-look and gray stoneware, it blends into the tile, making the floor a single, calm surface instead of a grid.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, meaning no pigment is left on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer always prescribes making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous articles such as concrete curbs are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as a grout, Starlike EVO is applied to joints that are clean, dust-free and open for the full tile thickness. First check whether the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling compounds\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and completely empty it into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass is formed, and scrape the wall and bottom of the bucket afterwards. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean as long as the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eHaze and residues can be removed from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not as corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so quickly spread the product over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout may yellow, which is particularly noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072117794,"sku":"8052283880109","price":53.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-110-grigio-perla-2-5-kg-voegmiddel-790.webp?v=1678039671"},{"product_id":"litokol-starlike-r-evo-115-grigio-seta-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 115 Grigio seta 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, shown here in the color Grigio seta (115). The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware, and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eGrigio seta (115) has the soft sheen of silk grey, slightly lighter than the tile you probably have in mind. With light grey stoneware, it adds depth without contrast.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, ensuring no pigment is left on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer prescribes always making a test joint first. This way, you can determine if the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items like concrete curbs are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free of rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling compounds\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket containing part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer (approximately 300 rpm) until a creamy, lump-free mass is formed, scraping the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and glue with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this time is shorter, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout may yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072183330,"sku":"8052283880130","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-115-grigio-seta-2-5-kg-voegmiddel-578.webp?v=1678039695"},{"product_id":"litokol-starlike-r-evo-235-caffe-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 235 Caffe 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Caffe (235). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eCaffe (235) is almost black with a brown core. Where Nero carbonio is cool, Caffe remains warm - noticeable with dark wood look and brown natural stone.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, meaning no pigment is left on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are excluded from the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you are using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling compounds\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D range.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and completely empty it into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the sides and bottom of the bucket afterwards. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes of pot life in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean as long as the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eHaze and residues can be removed from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything when the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint - wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, so no efflorescence occurs\u003c\/li\u003e\n\n\u003cli\u003eColor stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified as irritant only, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePot life\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout may yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072248866,"sku":"8052283880581","price":53.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-235-caffe-2-5-kg-voegmiddel-608.webp?v=1678039708"},{"product_id":"litokol-stylegrout-tech-silver-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech silver-2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in silver-grey. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, both indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eSilver-2 is half a tone deeper: distinctly grey, still subdued. Matches medium-grey tiles and concrete look.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause discolouration or make the tile difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has seeped into the joint must be removed. Remove plastic tile spacers before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or hot weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAllow for movement joints every 20 to 25 m² indoors and every 9 to 15 m² outdoors. Outdoors, these joints must also be finished to be watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water in a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for about 3 minutes and then mix again for a few seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 litres of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eApply between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixing instructions: more water causes shrinkage and lower final strength, and different amounts of water between two batches will result in colour differences in the final product. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the colour will be uneven. Do not add water after the bond has begun.\u003c\/p\u003e\u003cp\u003eRemove veils after hardening with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work for the first 12 hours from direct sunlight and strong drafts, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform colour\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 litres per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturation time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 litres, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water content, you will see a colour difference in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the colour will be uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical sheet. However, always make a test joint first, as porous stones can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072609314,"sku":"8052283880956","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-silver-2-a-3-kg-561.webp?v=1678039720"},{"product_id":"litokol-stylegrout-tech-ivory-1-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Ivory-1 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in ivory. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Ambience\u003c\/h3\u003e\u003cp\u003eIvory-1 is light ivory: warm white with a yellow undertone. It matches classic tiling where pure white quickly looks harsh.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free and open over the full tile thickness, and any adhesive residue that has seeped into the joint must be removed. Plastic tile spacers should be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in hot weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor work, allow for expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be finished waterproof.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly sprinkle in the powder while mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for about 3 minutes and then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: more water causes shrinkage and lower final strength, and different amounts of water between two buckets will result in color differences in the final result. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after bonding has begun is not permitted.\u003c\/p\u003e\u003cp\u003eRemove haze with a clean cloth after curing. If residue remains on the tile, it can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, even color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based powder grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturation time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see color differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes to wash off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the color will be uneven. Wait until the surface becomes matte and then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stones can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, it takes seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072642082,"sku":"8052283881021","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-ivory-1-a-3-kg-255.webp?v=1678039725"},{"product_id":"litokol-stylegrout-tech-ivory-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Ivory-2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in the colour soft ivory. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eIvory-2 is half a tone fuller than Ivory-1, with more cream in it. With terracotta and cotto-look tiles, it keeps the surface cohesive.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there is often microporosity in the surface, which can discolour the tile or make it difficult to clean. The manufacturer recommends always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint must be removed. Remove plastic tile spacers before grouting; butt joints without space are not allowed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in hot weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, count on expansion joints every 20 to 25 m², and for exterior work, every 9 to 15 m². Outdoors, these joints must also be sealed watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder, mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for about 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 litres of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, once the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixture: more water causes shrinkage and lower final strength, and different amounts of water between two buckets will result in colour differences in the final result. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the colour will be uneven. Adding water after binding has begun is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform colour\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken inconveniently\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 litres per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturation time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 litres, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two buckets with different water mixtures, you will see colour differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the colour will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical sheet. However, always make a test joint first, as porous types of stone can discolour. The cleaners Litoclean and Litoclean EVO are acidic and may NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, it takes seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072674850,"sku":"8052283881038","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-ivory-2-a-3-kg-380.webp?v=1678039731"},{"product_id":"litokol-stylegrout-tech-ivory-3-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Ivory-3 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in the color warm ivory. It comes as a powder in a 3 kg bag and is mixed with water. It can be used to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eIvory-3 is the deepest ivory in the range, leaning towards light beige. It works well with warm natural stone and sand-colored stoneware.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, micropores are often present on the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer recommends always creating a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open across the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers should be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in cases of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, allow for expansion joints every 20 to 25 m², and for exterior work, every 9 to 15 m². Outside, these joints must also be finished watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-to-mix ratio: more water leads to shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final product. Do not wash off too early—if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after binding has begun is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze with a clean cloth after hardening. If residue remains on the tile, it can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken annoyingly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturity time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTrafficable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUsage temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water-to-mix ratios, you will see color differences in the grout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stones can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is trafficable after 24 hours. For swimming pools, allow seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072707618,"sku":"8052283881045","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-ivory-3-a-kg-795.webp?v=1678039735"},{"product_id":"litokol-stylegrout-tech-beige-4-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Beige-4 á 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cementitious grout, presented here in the colour deep beige. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eBeige-4 is the deepest beige, leaning towards taupe. With brownish stoneware and clinker, the line disappears into the surface.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls under class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cementitious grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores on the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint should be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not allowed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in cases of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, count on expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly sprinkle in the powder while mixing with a drill and mixing rod until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 litres of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eApply between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber trowel, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: too much water leads to shrinkage and lower final strength, and different amounts of water between two batches will result in colour differences in the final result. Do not wash off too early — if the product is still plastic, you will partially empty the joint and the colour will be uneven. Adding water after bonding has begun is not allowed.\u003c\/p\u003e\u003cp\u003eRemove veils after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in a single product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence formation\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform colour\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken annoyingly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCementitious powdered grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContents\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 litres per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture maturation time\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 litres, which is 26 to 28%. Adhere to this: more water leads to shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see colour differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint, and the colour will become uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolour. The cleaners Litoclean and Litoclean EVO are acidic and must not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, seven days must pass before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072740386,"sku":"8052283881083","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-beige-4-a-3-kg-323.webp?v=1678039741"},{"product_id":"litokol-stylegrout-tech-brown-1-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Brown-1 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in light brown. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eBrown-1 is light brown with a sandy core. It blends well with terracotta and warm stoneware without creating dark lines.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstructed stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and klinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer advises always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or with rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor applications, allow for expansion joints every 20 to 25 m², and for outdoor applications, every 9 to 15 m². Outdoors, these joints must also be finished watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing rod until a lump-free mass is formed. Let the mixture rest for about 3 minutes, then mix again for a few more seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-to-powder ratio: too much water leads to shrinkage and lower final strength, and different amounts of water between two batches will cause color variation in the final result. Do not wash too early—if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after the bond has begun is not permitted.\u003c\/p\u003e\u003cp\u003eRemove haze after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, even color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture maturation time\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: too much water leads to shrinkage and lower final strength, and between two batches with different water-to-powder ratios, you will see color variation in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the color will be uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072773154,"sku":"8052283881090","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-brown-1-a-3-kg-409.webp?v=1678039746"},{"product_id":"litokol-stylegrout-tech-brown-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Brown-2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in medium brown. It comes as a powder in a 3 kg bag and is mixed with water. You can grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone with it, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eBrown-2 is medium brown and warm. It gives bricks and terracotta a cohesive look.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and brick\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there are often micropores in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer stipulates that in such cases, a test joint should always be made first.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or warm weather: moisten the joints first with a wet sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eUse an elastic sealant for expansion, corner, and connection joints, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, calculate expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be finished watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing rod until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixture: more water causes shrinkage and lower final strength, and different amounts of water between two batches result in color differences in the final product. Do not wash off too early - if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after bonding has started is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after hardening with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, even color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken annoyingly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based powdered grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture maturation time\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in sealed bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water mixtures, you will see color differences in the grout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will be uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072805922,"sku":"8052283881106","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-brown-2-a-3-kg-670.webp?v=1678039752"},{"product_id":"litokol-stylegrout-tech-brown-3-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Brown-3 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in dark brown. It comes as a powder in a 3 kg bag and is mixed with water. It is used for grouting ceramics, porcelain stoneware, mosaics, large slabs and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBrown-3 is a deep brown, almost espresso. Against light tiles, it creates a distinct outline, while with dark wood-look stoneware it appears more subdued.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause discoloration of the tile or make it difficult to clean. The manufacturer recommends always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, open over the full tile thickness, and any adhesive residue that has run into the joint must be removed. Remove plastic tile spacers before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor work, calculate separation joints every 20 to 25 m² and outdoors every 9 to 15 m². Outdoors, these joints must also be finished watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixer until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixture: more water causes shrinkage and lower final strength, and different amounts of water between two tubs result in color differences in the final result. Do not wash off too early - if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after the bonding has started is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze with a clean cloth after hardening. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based powdered grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturing time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and different water mixtures between two tubs will show color differences in the grout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the color will become uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stones can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before filling the pool.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072838690,"sku":"8052283881113","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-brown-3-a-kg-354.webp?v=1678039757"},{"product_id":"litokol-starlike-r-evo-410-verde-smeraldo-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 410 Verde smeraldo 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in the colour Verde smeraldo (410). The coloured paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaic, and the same product can also be used as a tile adhesive.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eVerde smeraldo (410) is a bright, saturated emerald green. A distinct choice that works best with glass mosaic, where the colour can catch the light.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The colour comes from sintered quartz spheres that are coloured on the surface, meaning no pigment is left on the tile and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and heavy-traffic floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware and porous materials, the manufacturer always recommends making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are excluded from the application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as a grout, Starlike EVO should be applied to joints that are clean, dust-free and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and levelling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen worktops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D range.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket containing component A; roll up the bag to ensure nothing is left behind. Mix with a slow-speed mixer at approximately 300 rpm until a creamy, lump-free mass is obtained, then scrape down the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApply between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes pot life at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout—wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive in one product, for joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColour stable: the quartz spheres are surface-coloured\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified only as irritant, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residue too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within about 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is particularly noticeable on light colours. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072871458,"sku":"8052283880758","price":56.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-410-verde-smeraldo-2-5-kg-voegmiddel-267.webp?v=1678039762"},{"product_id":"litokol-stylegrout-tech-silver-3-voeg-3-kg","title":"Litokol Grout StyleGrout Tech silver-3 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in dark silver-grey. It comes as a 3 kg powder bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eSilver-3 is dark silver-grey with a metallic impression. Against light tiles, it sharply defines the pattern.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The grout remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there is often microporosity in the surface, which can discolour the tile or make it difficult to clean. The manufacturer recommends always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, open over the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor work, allow for expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for approximately 3 minutes, then mix for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 litres of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, once the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixture: more water leads to shrinkage and lower final strength, and different amounts of water between two batches will result in colour differences in the final product. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the colour will be uneven. Adding water after the bonding has started is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze with a clean cloth after hardening. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform colour\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 litres per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturity time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 litres, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water content, you will see colour differences in the grout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the colour will be uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917072904226,"sku":"8052283880963","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-silver-3-a-kg-520.webp?v=1678039775"},{"product_id":"litokol-starlike-r-evo-120-grigio-piombo-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 120 Grigio piombo 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in color Grigio piombo (120). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eGrigio piombo (120) is lead grey: dark, cool, and heavy in tone. Against light tiles, it forms a distinct grid, while against anthracite, it creates a subtle shadow line.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is designed for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, preventing pigment from remaining on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and heavily trafficked floors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as grout, Starlike EVO should be applied to joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket with part A; roll up the bag as you do so to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is achieved, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, ideally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and adhesive in one product, for joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: quartz spheres are surface-colored\u003c\/li\u003e\n\n\u003cli\u003eHardener is classified only as irritant, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e-20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. You spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073002530,"sku":"8052283880161","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-120-grigio-piombo-2-5-kg-voegmiddel-837.webp?v=1678039791"},{"product_id":"litokol-stylegrout-tech-zwart-1-voeg-3-kg","title":"Litokol Grout StyleGrout Tech black - 1 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in black. It comes as a powder in a 3 kg bag and is mixed with water. It can be used to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, both indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eBlack-1 is black with a gray undertone, not jet black. With anthracite tiling, it keeps the lines clean without stark contrast.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there is often microporosity in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer advises making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open over the full tile thickness, and any adhesive residue that has seeped into the joint must be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in hot weather: moisten the joints first with a wet sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, allow for expansion joints every 20 to 25 m², and for exterior work, every 9 to 15 m². Outdoors, these joints must also be finished to be watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes and then mix again for a few seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes of working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mix ratio: more water causes shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final result. Do not wash too early — if the product is still plastic, you will partially empty the joint and the color will be uneven. Do not add water after the bond has begun.\u003c\/p\u003e\u003cp\u003eRemove haze after hardening with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturing time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTrafficable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in a sealed bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Please adhere to this: more water causes shrinkage and lower final strength, and different water amounts between two batches will result in color differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will become uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is trafficable after 24 hours. For swimming pools, allow seven days before filling the pool.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073035298,"sku":"8052283880970","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-zwart-1-a-3-kg-251.webp?v=1678039803"},{"product_id":"litokol-stylegrout-tech-zwart-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech black - 2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in deep black. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBlack-2 goes deeper: dense, matte black. On a white mosaic wall, it provides the sharpest contrast in the range.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint should be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: pre-moisten the joints with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in the presence of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, plan expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eApply between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixing ratio: more water causes shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final result. Do not wash off too early - if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after setting has begun is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after hardening with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken annoyingly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based powder grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture maturation time\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture specific gravity\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture pH\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water content, you will see color differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will become uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before filling the pool.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073133602,"sku":"8052283880987","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-zwart-2-a-3-kg-394.webp?v=1678039826"},{"product_id":"litokol-stylegrout-tech-beige-1-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Beige-1 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in the color light beige. It comes as a powder in a 3 kg bag and is mixed with water. It can be used to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eBeige-1 is light and sandy, just slightly warmer than off-white. A safe choice with light tiles whose undertone leans warm.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer recommends always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check if the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint must be removed. Remove plastic tile spacers before grouting; butt joints without space are not allowed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: pre-moisten the joints with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor applications, allow for expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be finished to be waterproof.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber grout float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: too much water leads to shrinkage and lower final strength, and varying amounts of water between two batches will cause color differences in the final result. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after the binding has started is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturation time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water leads to shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see color differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the color will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, allow seven days before filling the pool.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073166370,"sku":"8052283881052","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-beige-1-a-3-kg-737.webp?v=1678039831"},{"product_id":"litokol-stylegrout-tech-beige-3-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Beige-3 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in warm beige. It comes as a 3 kg powder bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eBeige-3 is warm beige, fuller and earthier. It gives light natural stone a calm base.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there are often micropores in the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer specifies that in such cases, a test joint should always be made first.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free and open over the full tile thickness, and any adhesive residue that has seeped into the joint must be removed. Remove plastic tile spacers before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or hot weather: first moisten the joints with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor work, allow for expansion joints every 20 to 25 m² and outdoors every 9 to 15 m². Outdoors, these joints must also be finished watertight.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly sprinkle in the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for about 3 minutes and then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 litres of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water mixture: more water causes shrinkage and lower final strength, and different amounts of water between two buckets result in colour differences in the final result. Do not wash off too early - if the product is still plastic, you will partly empty the joint and the colour will be uneven. Adding water after bonding has started is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after curing with a clean cloth. If residue remains on the tile, it can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong draughts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, even colour\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based powder grout\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 litres per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturation time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 litres, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two buckets with different water mixtures, you will see a colour difference in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the colour will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolour. The cleaners Litoclean and Litoclean EVO are acidic and may not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is load-bearing after 24 hours. For swimming pools, seven days apply before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073199138,"sku":"8052283881076","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-beige-3-a-kg-966.webp?v=1678039836"},{"product_id":"litokol-starlike-r-evo-glow-in-the-dark-night-vision-200-gram-voor-2-5-kg","title":"Color effect Glow in the dark | Night vision Litokol STARLIKE® Finishes 200 grams for 2.5 kg ","description":"\u003cp\u003eLitokol Starlike Finishes Night Vision is a colour effect that you mix into Starlike EVO as a third component. The 200-gram sachet is pre-dosed for a 2.5 kg bucket, so you don't have to weigh it. It is not a standalone grout but an additive to a bucket that you buy separately.\u003c\/p\u003e\u003ch3\u003eColour \u0026amp; atmosphere\u003c\/h3\u003e\u003cp\u003eNight Vision charges itself with light and then emits a bluish glow in the dark. Along a staircase or in a wellness area, this is both practical and surprising.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Night Vision cannot be used with every colour. The datasheet mentions these EVO colours: 110 Grigio Perla, 115 Grigio Seta, 120 Grigio Piombo, 205 Travertino, 208 Sabbia, 210 Greige, 215 Tortora, 225 Tabacco, 310 Azzurro Polvere, 320 Azzurro Caraibi, 330 Blu Avio, 340 Blu Denim, 350 Blu Zaffiro, 410 Verde Smeraldo, 420 Verde Prato, 430 Verde Pino, 500 Rosa Cipria, 530 Viola Ametista and 600 Giallo Vaniglia.\u003c\/p\u003e\u003cp\u003eAfter exposure to daylight or artificial light, the grout glows for about an hour without significantly changing its original colour.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware and mosaics\u003c\/li\u003e\n\n\u003cli\u003eClinker\u003c\/li\u003e\n\n\u003cli\u003eWalls and floors, indoors only\u003c\/li\u003e\n\n\u003cli\u003eBathrooms, kitchens, shops and showrooms\u003c\/li\u003e\n\n\u003cli\u003eFurniture elements and columns\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote the limitations.\u003c\/strong\u003e Do not use a bucket with this effect outdoors — on terraces, balconies, facades and in swimming pools — as the additives have poor resistance to UV radiation. Also, do not use it on surfaces that come into contact with aggressive chemicals, such as industrial floors.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eThe substrate requirements are those of Starlike EVO itself: the joints must be clean, dust-free and open to the full tile thickness, and the tile adhesive must be completely dry and cured.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eOnly with the EVO colours mentioned in the technical data sheet\u003c\/li\u003e\n\n\u003cli\u003ePre-dosed for the bucket size: this sachet is for 2.5 kg\u003c\/li\u003e\n\n\u003cli\u003eNot for outdoor applications\u003c\/li\u003e\n\n\u003cli\u003eNot on surfaces with aggressive chemical exposure\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe effect is strongest on a surface exposed to daylight or artificial light. In a dark corner, you will see little of it.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, mix the hardener (part B) into the coloured paste (part A) of Starlike EVO, using a slow-speed mixer, until a lump-free mass is obtained. Then carefully pour in this sachet and mix it gently until evenly distributed.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePour carefully: the powder is light and easily dusts up\u003c\/li\u003e\n\n\u003cli\u003eMix at low speed, otherwise the product will splash\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eMost favourable between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eDo not add water or solvent to make it easier to spread. Below +10 °C, the mixture becomes thick and difficult to work with, and curing takes much longer; do not start if the temperature drops below +10 °C within 24 hours. In warm weather, spread the product quickly over the surface, as the reaction heat in the bucket shortens the working time.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePre-dosed for a 2.5 kg bucket: no weighing required\u003c\/li\u003e\n\n\u003cli\u003eDoes not affect the ease of cleaning Starlike EVO\u003c\/li\u003e\n\n\u003cli\u003eAfter exposure to daylight or artificial light, the joint glows for about an hour without significantly changing its original colour.\u003c\/li\u003e\n\n\u003cli\u003eThe effect becomes stronger the more light falls on the surface\u003c\/li\u003e\n\n\u003cli\u003eFor indoor applications only\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eColour effect as a third component for Starlike EVO\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e200 grams, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIntended for\u003c\/td\u003e\n\n\u003ctd\u003eStarlike EVO 2.5 kg bucket\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTo be mixed with\u003c\/td\u003e\n\n\u003ctd\u003eA fixed list of EVO colours, see description\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication\u003c\/td\u003e\n\n\u003ctd\u003eIndoors only, floor and wall\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003eMost favourable between +18 °C and +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eGlow duration\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 1 hour after exposure to light\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I also need a bucket of Starlike EVO for this?\u003c\/strong\u003e Yes. This is an additive, not a grout in itself. The sachet is pre-dosed for a 2.5 kg bucket, which you order separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Night Vision work with every colour?\u003c\/strong\u003e No, only with the colours mentioned in the technical data sheet. If your colour is not listed, choose Spotlight or Gold, which can be mixed with the entire range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this also be used on my balcony or terrace?\u003c\/strong\u003e No. These additives have poor resistance to UV radiation and are therefore only intended for indoor use. For outdoor use, choose a regular EVO colour without effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prevent the powder from dusting?\u003c\/strong\u003e Pour it slowly into the already mixed bucket and keep the mixer speed low. The powder is very light, so fast pouring or hard mixing will make it dust up.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073231906,"sku":"8032853938218","price":113.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/kleureffect-glow-in-the-dark-night-vision-litokol-starliker-evo-200-gram-voor-2-5-kg-976.webp?v=1678039842"},{"product_id":"litokol-starlike-r-evo-225-tabacco-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 225 Tabacco 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Tabacco (225) color. The colored paste and hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eTabacco (225) is a warm mid-brown, the color of dried tobacco leaf. With terracotta and brown stoneware, it holds the surface together without creating dark lines.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz beads that are colored on the surface, which means no pigment remains on the tile, and cleaning is easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet areas, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eAs a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not permitted, and you should remove plastic tile spacers before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout, but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the hardener bag and empty it completely into the bucket containing part A; roll up the bag so that nothing remains. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is obtained, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, optimally between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residues from the tile after about 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, thus preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz beads are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much time do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMay I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: if not diluted or rinsed sufficiently, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073264674,"sku":"8052283880499","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-225-tabacco-2-5-kg-voegmiddel-868.webp?v=1678039857"},{"product_id":"litokol-stylegrout-tech-grey-1-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Gray-1 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in light grey. It comes as a powder in a 3 kg bag and is mixed with water. You can use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eGrey-1 is a light and neutral grey, without warm or cool undertones. It's the most discreet choice for grey tiling.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single- or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker tiles\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePolished porcelain stoneware and natural stone often have micropores on the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open across the full tile thickness, and any adhesive residue that has seeped into the joint should be removed. Remove plastic tile spacers before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply on damp surfaces or with rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor indoor work, allow for expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mixture is formed. Let the mixture rest for about 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: too much water leads to shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final product. Do not wash off too early — if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after bonding has begun is not allowed.\u003c\/p\u003e\u003cp\u003eRemove haze after hardening with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaturity time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in a sealed bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water leads to shrinkage and lower final strength, and you will see color differences in the joint between two batches with different water-mixing ratios.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will become uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stones can discolor. The cleaners Litoclean and Litoclean EVO are acidic and may not be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, seven days must pass before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073297442,"sku":"8052283880994","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-grey-1-a-3-kg-176.webp?v=1678039869"},{"product_id":"litokol-stylegrout-tech-grey-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Gray-2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in medium gray. It comes as a powder in a 3 kg bag and is mixed with water. It is used to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; ambiance\u003c\/h3\u003e\u003cp\u003eGrey-2 is medium gray, the tone of smoothed concrete. With concrete-look tiles, this completes the illusion.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaics\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there is often microporosity in the surface, which can cause the tile to discolor or be difficult to clean. The manufacturer recommends always making a test joint first in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open to the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers must be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or hot weather: pre-moisten the joints with a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in case of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, count on expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Mixing by hand is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes of working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: more water causes shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final result. Do not wash off too early — if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after bonding has begun is not permitted.\u003c\/p\u003e\u003cp\u003eRemove haze with a clean cloth after curing. If residue remains on the tile, it can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, uniform color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from −30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approximately 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture maturation time\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time before cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture specific gravity\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixture pH\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in a sealed bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see color differences in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partially empty the joint and the color will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolor. The cleaners Litoclean and Litoclean EVO are acidic and should NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work can be subjected to traffic after 24 hours. For swimming pools, seven days apply before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073330210,"sku":"8052283881007","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-grey-2-a-3-kg-940.webp?v=1678039875"},{"product_id":"litokol-stylegrout-tech-beige-2-voeg-3-kg","title":"Litokol Grout StyleGrout Tech Beige-2 to 3 kg","description":"\u003cp\u003eLitokol StyleGrout Tech is a flexible cement-based grout, here in sand-beige. It comes as a powder in a 3 kg bag and is mixed with water. You use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eBeige-2 is sand-beige with a grey core. With greige and travertine-look, the grout blends with the tile instead of contrasting with it.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and industrial floors\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith polished porcelain stoneware and natural stone, there are often micropores in the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer recommends always making a test joint in such cases.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFirst, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open across the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers should be removed before grouting; butt joints without space are not permitted.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFor highly absorbent tiles or in hot weather: moisten the joints first with a wet sponge\u003c\/li\u003e\n\n\u003cli\u003eDo not apply to damp substrates or in cases of rising damp\u003c\/li\u003e\n\n\u003cli\u003eDo not add lime, cement, or other materials to the product\u003c\/li\u003e\n\n\u003cli\u003eFor expansion, corner, and connection joints, use an elastic sealant, not grout\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor interior work, count on expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eFirst, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for approximately 3 minutes and then mix again for a few more seconds. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eApproximately 0.8 liters of water per 3 kg bag, which is 26 to 28%\u003c\/li\u003e\n\n\u003cli\u003eProcess between +5 °C and +35 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 50 minutes working time at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the direction of the joint\u003c\/li\u003e\n\n\u003cli\u003eAfter 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAdhere to the water-mixing ratio: more water results in shrinkage and lower final strength, and different amounts of water between two batches will cause color variations in the final result. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after the binding has begun is not permitted.\u003c\/p\u003e\u003cp\u003eRemove veils after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. \u003cstrong\u003eDo not use these cleaners on non-acid-resistant materials such as marble or limestone.\u003c\/strong\u003e Protect the work for the first 12 hours from direct sunlight and strong drafts, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eJoint width from 0 to 20 mm, in one product for floor and wall\u003c\/li\u003e\n\n\u003cli\u003eClass CG2WA: reduced water absorption and high abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003eCompensated shrinkage, keeping the joint full and compact\u003c\/li\u003e\n\n\u003cli\u003ePrevents the formation of efflorescence\u003c\/li\u003e\n\n\u003cli\u003eStable, even color\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -30 °C to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eRemains easy to work with and does not thicken unpleasantly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eCement-based grout in powder form\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eCG2WA according to EN 13888 and ISO 13007-3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e3 kg bag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint Width\u003c\/td\u003e\n\n\u003ctd\u003e0 to 20 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing Water\u003c\/td\u003e\n\n\u003ctd\u003e26 to 28%, approx. 0.8 liters per 3 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRipening time of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 50 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003e+5 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWaiting time for cleaning\u003c\/td\u003e\n\n\u003ctd\u003eApprox. 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e−30 °C to +80 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.94 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH of the mixture\u003c\/td\u003e\n\n\u003ctd\u003e13\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bag, store dry and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water goes into a 3 kg bag?\u003c\/strong\u003e Approximately 0.8 liters, which is 26 to 28%. Stick to this: more water causes shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see color variation in the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I have to wait 15 to 30 minutes before washing off?\u003c\/strong\u003e As long as the product is still plastic, the sponge will partly empty the joint and the color will become uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this grout on natural stone?\u003c\/strong\u003e Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolour. The cleaners Litoclean and Litoclean EVO are acidic and must NOT be used on marble or limestone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used again?\u003c\/strong\u003e The work is loadable after 24 hours. For swimming pools, seven days apply before the pool can be filled.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073362978,"sku":"8052283881069","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-voegmiddel-stylegrout-tech-beige-2-a-3-kg-562.webp?v=1678039880"},{"product_id":"litokol-litoshine-evo-tegelreiniger-1-l","title":"Litokol Litoshine EVO Tile Cleaner 1 L","description":"\u003cp\u003eLitokol Litoshine EVO is a neutral water-based cleaner for the daily maintenance of floors. The product is concentrated, so you dilute it in water. At the recommended dosage, you do not need to rinse.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; application\u003c\/h3\u003e\u003cp\u003eBecause the formula is neutral, the product can be used on almost any surface, including more sensitive ones. It is primarily intended for floors that absorb little water.\u003c\/p\u003e\u003cp\u003eThe bottle is for everyday use, not for heavy-duty work. Neutral, without wax and without solvents, so no dull layer builds up — precisely where ordinary all-purpose cleaners fail on a tiled floor.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles and porcelain stoneware\u003c\/li\u003e\n\n\u003cli\u003ePolished and honed stoneware\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eNatural stone and terracotta\u003c\/li\u003e\n\n\u003cli\u003eWood and resin floors\u003c\/li\u003e\n\n\u003cli\u003eIndoors and outdoors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote the limit:\u003c\/strong\u003e this is a maintenance product, not a stain remover. For stubborn stains, Litostain is intended, and for epoxy residues after grouting, the Starlike Care line or Litonet EVO.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; compatibility\u003c\/h3\u003e\u003cp\u003eThe product is neutral and does not affect the surface, even with daily use.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eEspecially suitable for floors that absorb little or no water\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for use on sensitive surfaces\u003c\/li\u003e\n\n\u003cli\u003eLeaves no wax layer or film\u003c\/li\u003e\n\n\u003cli\u003eContains no solvents\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eIf you are unsure whether a specific substrate is suitable, first make a test piece. The number of types of substrates and tiles is too large to exclude everything beforehand.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eDilute the product in water before mopping. The correct dosage depends on how much water the floor absorbs.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e1 to 2 capfuls per 5 liters of water for low-absorbent floors\u003c\/li\u003e\n\n\u003cli\u003e2 to 3 capfuls per 5 liters of water for natural stone and terracotta\u003c\/li\u003e\n\n\u003cli\u003eCan be used by hand or with a machine\u003c\/li\u003e\n\n\u003cli\u003eRinsing is not necessary at the recommended dosage\u003c\/li\u003e\n\n\u003cli\u003eApply between approximately +4 °C and +35 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eDo not dose more heavily than indicated. A too concentrated solution will leave residues — precisely what you wanted to prevent with this product.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eNeutral, therefore suitable for daily use on almost any surface\u003c\/li\u003e\n\n\u003cli\u003eWater-based, without wax and without solvents\u003c\/li\u003e\n\n\u003cli\u003eLeaves no haze or film\u003c\/li\u003e\n\n\u003cli\u003eRinsing is not necessary with the correct dosage\u003c\/li\u003e\n\n\u003cli\u003eFresh scent\u003c\/li\u003e\n\n\u003cli\u003eConcentrated: one liter lasts a long time\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eNeutral concentrated water-based cleaner\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContent\u003c\/td\u003e\n\n\u003ctd\u003e1 liter bottle\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\n\u003ctd\u003eClear, colorless liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDosage\u003c\/td\u003e\n\n\u003ctd\u003e1 to 2 capfuls per 5 liters of water; natural stone and terracotta 2 to 3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRinsing\u003c\/td\u003e\n\n\u003ctd\u003eNot necessary at the recommended dosage\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProcessing temperature\u003c\/td\u003e\n\n\u003ctd\u003eApproximately +4 °C to +35 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\n\u003ctd\u003e900 to 1,000 m² per liter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e36 months in unopened bottle, cool, dark and frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to rinse after mopping?\u003c\/strong\u003e No, provided you follow the recommended dosage. This is precisely what makes the product suitable for daily maintenance: mop and done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I use per bucket?\u003c\/strong\u003e One to two capfuls per five liters of water for floors that absorb little water. For natural stone and terracotta, two to three capfuls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I also remove stains with this?\u003c\/strong\u003e No. This is a maintenance product. For stubborn stains, Litostain is intended, and for epoxy residues after grouting, the Starlike Care line or Litonet EVO.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not just an all-purpose cleaner?\u003c\/strong\u003e Many household cleaners contain wax or solvents and build up a dull layer on a tiled floor. This formula is wax- and solvent-free and leaves no film.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073395746,"sku":"8032853938997","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/files\/LitoShine_Evo_5b6ee956-3788-4dbf-b2ab-98821f1e0054.jpg?v=1785255404"},{"product_id":"litokol-starlike-r-evo-232-cuoio-2-5kg","title":"Epoxy grout Litokol STARLIKE® EVO 232 Cuoio 2.5 kg","description":"\u003cp\u003eLitokol Starlike EVO is a two-component epoxy grout, here in Cuoio (232) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramic, porcelain stoneware, and mosaic, and the same product can also be used as tile adhesive.\u003c\/p\u003e\u003ch3\u003eColor \u0026amp; Atmosphere\u003c\/h3\u003e\u003cp\u003eCuoio (232) has the reddish-brown tone of tanned leather. It is the warmest of the dark browns and works well with clinker and terracotta.\u003c\/p\u003e\u003ch3\u003eProduct \u0026amp; Application\u003c\/h3\u003e\u003cp\u003eStarlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The hardened joint is non-absorbent and stain-resistant. The color comes from sintered quartz spheres that are colored on the surface, ensuring no pigment remains on the tile and making cleaning easier.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eCeramic tiles, porcelain stoneware, and single or double-fired tiles\u003c\/li\u003e\n\n\u003cli\u003eCeramic and glass mosaic\u003c\/li\u003e\n\n\u003cli\u003eLarge-format tiles and thin laminated stoneware slabs\u003c\/li\u003e\n\n\u003cli\u003eMarble, granite, natural stone, and reconstituted stone\u003c\/li\u003e\n\n\u003cli\u003eTerracotta and clinker\u003c\/li\u003e\n\n\u003cli\u003eWet rooms, showers, swimming pools, fountains, spas, and hammams\u003c\/li\u003e\n\n\u003cli\u003eTerraces, balconies, facades, and floors with heavy traffic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFor natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This helps determine if the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete curbs are outside the scope of application.\u003c\/p\u003e\u003ch3\u003eSubstrate \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eWhen used as grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eScreeds and leveling layers\u003c\/li\u003e\n\n\u003cli\u003eConcrete and plasterwork\u003c\/li\u003e\n\n\u003cli\u003eUnderfloor heating\u003c\/li\u003e\n\n\u003cli\u003eWaterproofing layers, including Coverflex and Aquamaster EVO\u003c\/li\u003e\n\n\u003cli\u003eMetal substrates, for example in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003eWooden kitchen countertops with tiles or mosaic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eButt joints without space are not allowed, and plastic tile spacers should be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.\u003c\/p\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003cp\u003eCut open the bag of hardener and empty it completely into the bucket containing part A; roll up the bag to ensure nothing is left behind. Mix with a slow-speed mixer at approximately 300 rpm until a creamy, lump-free mass is formed, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProcess between +10 °C and +30 °C, most favorably between +18 °C and +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApproximately 60 minutes working time in the bucket at +23 °C\u003c\/li\u003e\n\n\u003cli\u003eApply with a rubber float, diagonally to the joint direction\u003c\/li\u003e\n\n\u003cli\u003eClean while the product is fresh: first with white felt, then a damp sponge\u003c\/li\u003e\n\n\u003cli\u003eWalkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eRemove haze and residue from the tile after approximately 24 hours using Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before laying breathable material over it.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eGrout and bonds with the same product, joints from 1 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eNon-absorbent and stain-resistant\u003c\/li\u003e\n\n\u003cli\u003eResistant to temperatures from -20 °C to +100 °C\u003c\/li\u003e\n\n\u003cli\u003eContains no cement, preventing efflorescence\u003c\/li\u003e\n\n\u003cli\u003eColor-stable: the quartz spheres are colored on the surface\u003c\/li\u003e\n\n\u003cli\u003eThe hardener is classified solely as irritating, not corrosive\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eType\u003c\/td\u003e\n\n\u003ctd\u003eTwo-component epoxy grout and adhesive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eClass\u003c\/td\u003e\n\n\u003ctd\u003eRG according to EN 13888, R2T according to EN 12004\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\n\u003ctd\u003e1 to 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e93.7 parts A to 6.3 parts B, pre-dosed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSpecific gravity of mixture\u003c\/td\u003e\n\n\u003ctd\u003e1.55 kg\/dm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 60 minutes at +23 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\n\u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWalkable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 24 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoadable\u003c\/td\u003e\n\n\u003ctd\u003eAfter 5 days, swimming pools after 7 days\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\n\u003ctd\u003e−20 °C to +100 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\n\u003ctd\u003e24 months in unopened packaging, store frost-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I also use Starlike EVO as tile adhesive?\u003c\/strong\u003e Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after about 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do I have after mixing?\u003c\/strong\u003e Approximately 60 minutes at +23 °C. In warm weather, this time is shorter, so spread the product quickly over the floor instead of leaving it in the bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I remove residues too late?\u003c\/strong\u003e After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean the grouted floor with bleach?\u003c\/strong\u003e No. The manufacturer advises against bleach: insufficient dilution or rinsing can cause the grout to yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.\u003c\/p\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":40917073461282,"sku":"8052283880550","price":54.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/products\/litokol-starliker-evo-232-cuoio-2-5-kg-voegmiddel-488.webp?v=1678039891"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/6084\/0738\/collections\/bouwmaterialen.webp?v=1675905398","url":"https:\/\/iwoon.nl\/en-fr\/collections\/bouwmaterialen.oembed?page=8","provider":"iWoon.nl","version":"1.0","type":"link"}